Regardless you feel you can’t see good enough through the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your motor vehicle to blame – your low beams. Although this adjustment may seem simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this common manipulation, and in this content, we will see how to adjust the low beam lights of your Chevrolet Traverse? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Traverse.
Why set the low beam lights of your Chevrolet Traverse?
So let’s start our content with the point of adjusting the low beam lights of your Chevrolet Traverse. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and looking at this setting, either because the low beams of your Chevrolet Traverse are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Chevrolet Traverse for safety is a good plan.
To start, the adjusting of the dipped headlights of an Chevrolet Traverse must be done for a elementary safety cause. Regardless whether it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Traverse for law reasons
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Traverse?
We will now go forward to the part that concerns you the more in this content, how to adjust the low beams of his Chevrolet Traverse? This setting may seem to be a bit complicated, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Chevrolet Traverse
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Traverse
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Chevrolet Traverse (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Chevrolet Traverse is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Chevrolet Traverse, please browse our content on this subject.
If you want more tutorials on the Chevrolet Traverse, go to our Chevrolet Traverse category.
