It doesn’t matter if you feel you can’t see properly after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your automobile to blame – your low beams. Although this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this simple realignment, and in this document, we will see how to adjust the low beam lights of your Chevrolet Malibu? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Malibu.
Why set the low beam lights of your Chevrolet Malibu?
So let’s begin our document with the benefit of adjusting the low beam lights of your Chevrolet Malibu. For many people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not necessarily the case and looking at this setting, either because the low beams of your Chevrolet Malibu are not lighting up well, or because you have the feeling that they are too low or too powerful is a good option .
Adjusting the low beam of your Chevrolet Malibu for safety is a good option.
First of all, the adjusting of the dipped headlights of an Chevrolet Malibu must be done for a simple safety cause. Regardless it’s for you, or for the other drivers you encounter during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Malibu for legal justifications
In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Malibu?
We will now move on to the part that interests you the more in this document, how to adjust the low beams of his Chevrolet Malibu? This setting may seem a bit complicated, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Chevrolet Malibu
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Malibu
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Chevrolet Malibu (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Chevrolet Malibu is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Chevrolet Malibu, please browse our document on this subject.
To find more tips on the Chevrolet Malibu, take a look at the Chevrolet Malibu category.
