It doesn’t matter if you feel you can’t see good enough during the night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Despite the fact this adjustment may look easy thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this common manipulation, and in this content page, we will find out how to adjust the low beam lights of your Chevrolet HHR? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet HHR.
Why set the low beam lights of your Chevrolet HHR?
So let’s commence our content page with the advantage of adjusting the low beam lights of your Chevrolet HHR. For a lot of people these lights are well enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and verifying this setting, either because the low beams of your Chevrolet HHR are not lighting up well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your Chevrolet HHR for safety is a good option.
First of all, the adjusting of the dipped headlights of an Chevrolet HHR must be done for a simple safety reason. Regardless whether it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Chevrolet HHR for legal reasons
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet HHR?
We will now go forward to the part that concerns you the more in this content page, how to adjust the low beams of his Chevrolet HHR? This setting may appear a bit complicated, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Chevrolet HHR
First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet HHR
Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Chevrolet HHR (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your Chevrolet HHR is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Chevrolet HHR, please browse our content page on this subject.
To get more tips on the Chevrolet HHR, take a look at the Chevrolet HHR category.
