Whether you feel you can’t see as well during the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this simple modification, and in this content page, we will find out how to adjust the low beam lights of your Chevrolet Express? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Express.
Why set the low beam lights of your Chevrolet Express?
So let’s commence our content page with the point of adjusting the low beam lights of your Chevrolet Express. For many people these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not automatically the case and checking this setting, either because the low beams of your Chevrolet Express are not lighting up well, or because you have the sense that they are too low or too powerful is a good idea .
Adjusting the low beam of your Chevrolet Express for safety is a good idea.
To begin, the adjusting of the dipped headlights of an Chevrolet Express must be done for a basic safety reason. Regardless it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Express for legal motives
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Express?
We will now go forward to the section that interests you the more in this content page, how to adjust the low beams of his Chevrolet Express? This setting may seem a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Chevrolet Express
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Express
Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Chevrolet Express (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Chevrolet Express is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Chevrolet Express, please go through our content page on this subject.
If you need more guides on the Chevrolet Express, go to our Chevrolet Express category.
