Regardless whether you feel you can’t see as well at night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Despite the fact this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this ordinary realignment, and in this content page, we will see how to adjust the low beam lights of your Chevrolet Captiva? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Captiva.

set-low-beam-headlights-chevrolet-captiva

Why adjust the low beam lights of your Chevrolet Captiva?

So let’s begin our content page with the advantage of adjusting the low beam lights of your Chevrolet Captiva. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and verifying this setting, either because the low beams of your Chevrolet Captiva are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good plan .

Adjusting the low beam of your Chevrolet Captiva for safety is a good plan.

Firstly, the adjusting of the dipped headlights of an Chevrolet Captiva must be done for a simple safety purpose. Whether it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Chevrolet Captiva for law justifications

In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Chevrolet Captiva?

We will now go forward to the part that concerns you the most in this content page, how to adjust the low beams of his Chevrolet Captiva? This setting may seem to be a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Chevrolet Captiva

To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Chevrolet Captiva

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Chevrolet Captiva (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, examine that the low beam setting of your Chevrolet Captiva is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Chevrolet Captiva, please read our content page on this subject.

If you want more guides on the Chevrolet Captiva, go to our Chevrolet Captiva category.