Regardless you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your automobile to blame – your low beams. Even though this adjustment may seem easy thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this ordinary realignment, and in this content, we will find out how to adjust the low beam lights of your Chevrolet Bolt? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Bolt.
Why adjust the low beam lights of your Chevrolet Bolt?
So let’s begin our content with the interest of adjusting the low beam lights of your Chevrolet Bolt. For many people these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not constantly the case and verifying this setting, either because the low beams of your Chevrolet Bolt are not lighting up well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Chevrolet Bolt for safety is a wise decision.
To start, the adjusting of the dipped headlights of an Chevrolet Bolt must be done for a basic safety purpose. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Bolt for law reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Bolt?
We will now move on to the part that concerns you the most in this content, how to adjust the low beams of his Chevrolet Bolt? This setting may seem a bit difficult, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Chevrolet Bolt
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Bolt
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Chevrolet Bolt (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Chevrolet Bolt is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Chevrolet Bolt, please examine our content on this subject.
To discover more tips on the Chevrolet Bolt, take a look at the Chevrolet Bolt category.
