Regardless you feel you can’t see as well through the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your car to blame – your low beams. Despite the fact this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this ordinary realignment, and in this content page, we will see how to adjust the low beam lights of your Chevrolet Avalanche? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Avalanche.

set-low-beam-headlights-chevrolet-avalanche

Why adjust the low beam lights of your Chevrolet Avalanche?

So let’s commence our content page with the point of adjusting the low beam lights of your Chevrolet Avalanche. For many people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not automatically the case and examining this setting, either because the low beams of your Chevrolet Avalanche are not lighting up well, or because you have the sense that they are too weak or too powerful is a good idea .

Adjusting the low beam of your Chevrolet Avalanche for safety is a good idea.

To begin, the adjusting of the dipped headlights of an Chevrolet Avalanche must be done for a simple safety cause. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Chevrolet Avalanche for law justifications

Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Chevrolet Avalanche?

We will now go forward to the part that interests you the most in this content page, how to adjust the low beams of his Chevrolet Avalanche? This setting may appear to be a bit complicated, but if you stick to the guidelines you should be able to do it without too much problem.

Preparations to set the low beam of a Chevrolet Avalanche

Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure rigorously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Chevrolet Avalanche

Once your car is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Chevrolet Avalanche (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once completed, verify that the low beam setting of your Chevrolet Avalanche is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Chevrolet Avalanche, please read our content page on this subject.

Whenever you have any additional questions about the Chevrolet Avalanche, do not hesitate to consult our Chevrolet Avalanche category.