Whether you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your car to blame – your low beams. Despite the fact this correction may look simple thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this basic modification, and in this content page, we will see how to adjust the low beam lights of your Cadillac DTS? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Cadillac DTS.
Why adjust the low beam lights of your Cadillac DTS?
So let’s begin our content page with the point of adjusting the low beam lights of your Cadillac DTS. For many of us these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and examining this setting, either because the low beams of your Cadillac DTS are not lighting up well, or because you have the feeling that they are too low or too powerful is a good plan .
Adjusting the low beam of your Cadillac DTS for safety is a good plan.
First of all, the adjusting of the dipped headlights of an Cadillac DTS must be done for a basic safety reason. Regardless it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Cadillac DTS for law reasons
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Cadillac DTS?
We will now go forward to the part that interests you the most in this content page, how to adjust the low beams of his Cadillac DTS? This setting may appear a bit difficult, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Cadillac DTS
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Cadillac DTS
Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Cadillac DTS (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Cadillac DTS is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Cadillac DTS, please browse our content page on this subject.
If perhaps you have any further questions about the Cadillac DTS, do not hesitate to consult our Cadillac DTS category.
