Regardless you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Despite the fact this correction may appear simple thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this common manipulation, and in this article content, we will see how to adjust the low beam lights of your Cadillac CT6? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Cadillac CT6.
Why adjust the low beam lights of your Cadillac CT6?
So let’s commence our article content with the interest of adjusting the low beam lights of your Cadillac CT6. For most people these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and examining this setting, either because the low beams of your Cadillac CT6 are not lighting up well, or because you have the sense that they are too low or too strong is a good idea .
Adjusting the low beam of your Cadillac CT6 for security is a good idea.
Firstly, the adjusting of the dipped headlights of an Cadillac CT6 must be done for a elementary security reason. Whether it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Cadillac CT6 for law reasons
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Cadillac CT6?
We will now go forward to the part that interests you the most in this article content, how to adjust the low beams of his Cadillac CT6? This setting may sound a bit complex, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Cadillac CT6
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Cadillac CT6
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Cadillac CT6 (they are usually marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Cadillac CT6 is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Cadillac CT6, please read our article content on this subject.
If you wish more guides on the Cadillac CT6, go to our Cadillac CT6 category.
