Regardless whether you feel you can’t see good enough after dark, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Although this correction may look easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this ordinary modification, and in this document, we will find out how to adjust the low beam lights of your Cadillac ATS? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Cadillac ATS.
Why set the low beam lights of your Cadillac ATS?
So let’s begin our document with the interest of adjusting the low beam lights of your Cadillac ATS. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and checking this setting, either because the low beams of your Cadillac ATS are not illuminating well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Cadillac ATS for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Cadillac ATS must be done for a basic security purpose. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Cadillac ATS for legal motives
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Cadillac ATS?
We will now move on to the part that interests you the more in this document, how to adjust the low beams of his Cadillac ATS? This setting may seem a bit complicated, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Cadillac ATS
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Cadillac ATS
Once your motor vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Cadillac ATS (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Cadillac ATS is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Cadillac ATS, please go through our document on this subject.
To discover more tips on the Cadillac ATS, take a look at the Cadillac ATS category.
