Regardless whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this common modification, and in this article content, we will find out how to adjust the low beam lights of your Buick Enclave? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Buick Enclave.
Why adjust the low beam lights of your Buick Enclave?
So let’s begin our article content with the benefit of adjusting the low beam lights of your Buick Enclave. For most people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not always the case and looking at this setting, either because the low beams of your Buick Enclave are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good idea .
Adjusting the low beam of your Buick Enclave for security is a good idea.
To begin, the adjusting of the dipped headlights of an Buick Enclave must be done for a elementary security purpose. Whether it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Buick Enclave for law motives
Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Buick Enclave?
We will now move on to the part that concerns you the most in this article content, how to adjust the low beams of his Buick Enclave? This setting may sound a bit complex, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Buick Enclave
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Buick Enclave
Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Buick Enclave (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Buick Enclave is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Buick Enclave, please read our article content on this subject.
If you want more guides on the Buick Enclave, go to our Buick Enclave category.
