It doesn’t matter if you feel you can’t see properly at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your car to blame – your low beams. Although this adjustment may seem simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this common manipulation, and in this article, we will discover how to adjust the low beam lights of your BMW X5? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your BMW X5.

set-low-beam-headlights-bmw-x5

Why adjust the low beam lights of your BMW X5?

So let’s begin our article with the advantage of adjusting the low beam lights of your BMW X5. For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and verifying this setting, either because the low beams of your BMW X5 are not illuminating well, or because you have the sense that they are too weak or too powerful is a good option .

Adjusting the low beam of your BMW X5 for security is a good option.

To begin, the adjusting of the dipped headlights of an BMW X5 must be done for a basic security cause. Regardless whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an BMW X5 for legal justifications

Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a BMW X5?

We will now go forward to the part that concerns you the more in this article, how to adjust the low beams of his BMW X5? This setting may appear to be a bit difficult, but if you follow the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a BMW X5

First of all, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure carefully.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his BMW X5

Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your BMW X5 (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once completed, examine that the low beam setting of your BMW X5 is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your BMW X5, please go through our article on this subject.

To get more tips on the BMW X5, take a look at the BMW X5 category.