It doesn’t matter if you feel you can’t see good enough during the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your car to blame – your low beams. Although this correction may look easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple realignment, and in this content, we will see how to adjust the low beam lights of your BMW X3? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your BMW X3.

set-low-beam-headlights-bmw-x3

Why set the low beam lights of your BMW X3?

So let’s begin our content with the advantage of adjusting the low beam lights of your BMW X3. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not always the case and looking at this setting, either because the low beams of your BMW X3 are not lighting up well, or because you have the sense that they are too low or too strong is a wise decision .

Adjusting the low beam of your BMW X3 for security is a wise decision.

To begin, the adjusting of the dipped headlights of an BMW X3 must be done for a basic security reason. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an BMW X3 for legal justifications

Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a BMW X3?

We will now go forward to the part that concerns you the most in this content, how to adjust the low beams of his BMW X3? This setting may seem a bit complicated, but if you stick to the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a BMW X3

First of all, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure precisely.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his BMW X3

Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your BMW X3 (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, examine that the low beam setting of your BMW X3 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your BMW X3, please examine our content on this subject.

To find more tips on the BMW X3, take a look at the BMW X3 category.