Regardless whether you feel you can’t see good enough at night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your vehicle to blame – your low beams. Even though this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this common modification, and in this content, we will see how to adjust the low beam lights of your Bmw Serie 7? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 7.
Why set the low beam lights of your Bmw Serie 7?
So let’s start our content with the benefit of adjusting the low beam lights of your Bmw Serie 7. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and looking at this setting, either because the low beams of your Bmw Serie 7 are not lighting up well, or because you have the feeling that they are too weak or too strong is a good option .
Adjusting the low beam of your Bmw Serie 7 for security is a good option.
To begin, the adjusting of the dipped headlights of an Bmw Serie 7 must be done for a basic security purpose. Regardless it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 7 for legal justifications
Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 7?
We will now go forward to the part that concerns you the more in this content, how to adjust the low beams of his Bmw Serie 7? This setting may appear to be a bit difficult, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Bmw Serie 7
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 7
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 7 (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Bmw Serie 7 is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Bmw Serie 7, please go through our content on this subject.
If you want more guides on the Bmw Serie 7, go to our Bmw Serie 7 category.
