Regardless you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your vehicle to blame – your low beams. Although this correction may seem simple thanks to the thumbwheel on your dashboard, a full correction is much more technical than this simple modification, and in this content, we will see how to adjust the low beam lights of your Bmw Serie 4 F33? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 4 F33.
Why adjust the low beam lights of your Bmw Serie 4 F33?
So let’s begin our content with the benefit of adjusting the low beam lights of your Bmw Serie 4 F33. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and checking this setting, either because the low beams of your Bmw Serie 4 F33 are not illuminating well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your Bmw Serie 4 F33 for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Bmw Serie 4 F33 must be done for a simple security reason. Regardless it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 4 F33 for law motives
Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 4 F33?
We will now go forward to the section that interests you the most in this content, how to adjust the low beams of his Bmw Serie 4 F33? This setting may appear to be a bit difficult, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Bmw Serie 4 F33
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 4 F33
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 4 F33 (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your Bmw Serie 4 F33 is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Bmw Serie 4 F33, please read our content on this subject.
If you want more tutorials on the Bmw Serie 4 F33, go to our Bmw Serie 4 F33 category.
