It doesn’t matter if you feel you can’t see as well at night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Even though this correction may look easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this ordinary realignment, and in this article, we will find out how to adjust the low beam lights of your Bmw Serie 3? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 3.
Why adjust the low beam lights of your Bmw Serie 3?
So let’s begin our article with the benefit of adjusting the low beam lights of your Bmw Serie 3. For most of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not constantly the case and examining this setting, either because the low beams of your Bmw Serie 3 are not lighting up well, or because you have the sense that they are too low or too powerful is a good idea .
Adjusting the low beam of your Bmw Serie 3 for security is a good idea.
To begin, the adjusting of the dipped headlights of an Bmw Serie 3 must be done for a simple security cause. Regardless whether it’s for you, or for the other drivers you come across during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 3 for legal justifications
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 3?
We will now go forward to the section that concerns you the most in this article, how to adjust the low beams of his Bmw Serie 3? This setting may seem a bit complex, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Bmw Serie 3
First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 3
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 3 (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Bmw Serie 3 is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Bmw Serie 3, please read our article on this subject.
To get more tips on the Bmw Serie 3, take a look at the Bmw Serie 3 category.
