It doesn’t matter if you feel you can’t see as well after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Although this correction may seem easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple manipulation, and in this article, we will see how to adjust the low beam lights of your Bmw Serie 3 E93? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 3 E93.
Why set the low beam lights of your Bmw Serie 3 E93?
So let’s commence our article with the interest of adjusting the low beam lights of your Bmw Serie 3 E93. For most people these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and looking at this setting, either because the low beams of your Bmw Serie 3 E93 are not illuminating well, or because you have the sense that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Bmw Serie 3 E93 for safety is a wise decision.
To start, the adjusting of the dipped headlights of an Bmw Serie 3 E93 must be done for a ordinary safety purpose. Whether it’s for you, or for the other users you come across during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 3 E93 for legal justifications
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 3 E93?
We will now move on to the section that interests you the most in this article, how to adjust the low beams of his Bmw Serie 3 E93? This setting may appear to be a bit difficult, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Bmw Serie 3 E93
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 3 E93
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 3 E93 (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Bmw Serie 3 E93 is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Bmw Serie 3 E93, please examine our article on this subject.
Whenever you have any additional questions about the Bmw Serie 3 E93, do not hesitate to consult our Bmw Serie 3 E93 category.
