Regardless whether you feel you can’t see good enough at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your vehicle to blame – your low beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this ordinary modification, and in this content, we will find out how to adjust the low beam lights of your Bmw Serie 3 E92? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 3 E92.
Why set the low beam lights of your Bmw Serie 3 E92?
So let’s begin our content with the interest of adjusting the low beam lights of your Bmw Serie 3 E92. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and checking out this setting, either because the low beams of your Bmw Serie 3 E92 are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good idea .
Adjusting the low beam of your Bmw Serie 3 E92 for safety is a good idea.
To begin, the adjusting of the dipped headlights of an Bmw Serie 3 E92 must be done for a basic safety purpose. It doesn’t matter if it’s for you, or for the other users you come across during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 3 E92 for law motives
In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 3 E92?
We will now move on to the part that concerns you the most in this content, how to adjust the low beams of his Bmw Serie 3 E92? This setting may appear to be a bit complicated, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Bmw Serie 3 E92
First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 3 E92
Once your vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 3 E92 (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Bmw Serie 3 E92 is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Bmw Serie 3 E92, please read our content on this subject.
To discover more tips on the Bmw Serie 3 E92, take a look at the Bmw Serie 3 E92 category.
