It doesn’t matter if you feel you can’t see as well during the night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Even though this correction may appear easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this common realignment, and in this document, we will see how to adjust the low beam lights of your Bmw Serie 2? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 2.
Why set the low beam lights of your Bmw Serie 2?
So let’s start our document with the point of adjusting the low beam lights of your Bmw Serie 2. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and examining this setting, either because the low beams of your Bmw Serie 2 are not illuminating well, or because you have the sense that they are too weak or too strong is a good plan .
Adjusting the low beam of your Bmw Serie 2 for security is a good plan.
First of all, the adjusting of the dipped headlights of an Bmw Serie 2 must be done for a basic security purpose. Regardless whether it’s for you, or for the other drivers you come across during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 2 for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 2?
We will now go forward to the part that interests you the most in this document, how to adjust the low beams of his Bmw Serie 2? This setting may seem to be a bit complicated, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Bmw Serie 2
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 2 (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Bmw Serie 2 is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Bmw Serie 2, please examine our document on this subject.
To find more tips on the Bmw Serie 2, take a look at the Bmw Serie 2 category.
