Whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Even though this correction may appear easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this ordinary realignment, and in this article content, we will see how to adjust the low beam lights of your Bmw Serie 2 F23? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 2 F23.

set-low-beam-headlights-bmw-serie-2-f23

Why set the low beam lights of your Bmw Serie 2 F23?

So let’s begin our article content with the interest of adjusting the low beam lights of your Bmw Serie 2 F23. For the majority of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and checking this setting, either because the low beams of your Bmw Serie 2 F23 are not lighting up well, or because you have the sense that they are too low or too powerful is a good plan .

Adjusting the low beam of your Bmw Serie 2 F23 for safety is a good plan.

Firstly, the adjusting of the dipped headlights of an Bmw Serie 2 F23 must be done for a basic safety reason. Regardless whether it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence fundamental for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Bmw Serie 2 F23 for legal motives

Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Bmw Serie 2 F23?

We will now go forward to the part that interests you the more in this article content, how to adjust the low beams of his Bmw Serie 2 F23? This setting may seem a bit difficult, but if you stick to the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a Bmw Serie 2 F23

First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure precisely.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Bmw Serie 2 F23

Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 2 F23 (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, verify that the low beam setting of your Bmw Serie 2 F23 is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Bmw Serie 2 F23, please read our article content on this subject.

To get more tips on the Bmw Serie 2 F23, take a look at the Bmw Serie 2 F23 category.