Regardless you feel you can’t see as well through the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your vehicle to blame – your low beams. Although this adjustment may seem to be easy thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this ordinary modification, and in this article, we will discover how to adjust the low beam lights of your Bmw Serie 2 F22? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 2 F22.
Why set the low beam lights of your Bmw Serie 2 F22?
So let’s start our article with the interest of adjusting the low beam lights of your Bmw Serie 2 F22. For many people these lights are good enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and looking at this setting, either because the low beams of your Bmw Serie 2 F22 are not lighting up well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Bmw Serie 2 F22 for security is a good plan.
To begin, the adjusting of the dipped headlights of an Bmw Serie 2 F22 must be done for a ordinary security purpose. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 2 F22 for law reasons
Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 2 F22?
We will now move on to the part that interests you the most in this article, how to adjust the low beams of his Bmw Serie 2 F22? This setting may seem a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Bmw Serie 2 F22
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 2 F22
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 2 F22 (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your Bmw Serie 2 F22 is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Bmw Serie 2 F22, please examine our article on this subject.
If you wish more tutorials on the Bmw Serie 2 F22, go to our Bmw Serie 2 F22 category.
