It doesn’t matter if you feel you can’t see properly after dark, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Even though this correction may seem easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this basic realignment, and in this content page, we will see how to adjust the low beam lights of your Bmw Serie 1? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 1.
Why set the low beam lights of your Bmw Serie 1?
So let’s start our content page with the point of adjusting the low beam lights of your Bmw Serie 1. For most people these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and verifying this setting, either because the low beams of your Bmw Serie 1 are not illuminating well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Bmw Serie 1 for safety is a good idea.
Firstly, the adjusting of the dipped headlights of an Bmw Serie 1 must be done for a simple safety reason. Whether it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 1 for law reasons
Additionally to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 1?
We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Bmw Serie 1? This setting may appear to be a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Bmw Serie 1
To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 1
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 1 (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Bmw Serie 1 is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Bmw Serie 1, please browse our content page on this subject.
To discover more tips on the Bmw Serie 1, take a look at the Bmw Serie 1 category.
