Regardless you feel you can’t see as well after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Even though this adjustment may seem easy thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this simple manipulation, and in this content, we will see how to adjust the low beam lights of your BMW 5 Series? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your BMW 5 Series.

set-low-beam-headlights-bmw-5-series

Why set the low beam lights of your BMW 5 Series?

So let’s begin our content with the benefit of adjusting the low beam lights of your BMW 5 Series. For most people these lights are well enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and examining this setting, either because the low beams of your BMW 5 Series are not lighting up well, or because you have the feeling that they are too low or too powerful is a wise decision .

Adjusting the low beam of your BMW 5 Series for safety is a wise decision.

First of all, the adjusting of the dipped headlights of an BMW 5 Series must be done for a elementary safety cause. Regardless it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an BMW 5 Series for legal reasons

Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a BMW 5 Series?

We will now move on to the section that interests you the most in this content, how to adjust the low beams of his BMW 5 Series? This setting may seem to be a bit complex, but if you stick to the guidelines you should be able to do it without too much difficulty.

Preparations to set the low beam of a BMW 5 Series

To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure precisely.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his BMW 5 Series

Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your BMW 5 Series (they are usually marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, examine that the low beam setting of your BMW 5 Series is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your BMW 5 Series, please go through our content on this subject.

In the event that you have any additional questions about the BMW 5 Series, do not hesitate to consult our BMW 5 Series category.