It doesn’t matter if you feel you can’t see as well after dark, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your car to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this simple manipulation, and in this content page, we will see how to adjust the low beam lights of your BMW 2 Series? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your BMW 2 Series.
Why adjust the low beam lights of your BMW 2 Series?
So let’s start our content page with the benefit of adjusting the low beam lights of your BMW 2 Series. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and verifying this setting, either because the low beams of your BMW 2 Series are not illuminating well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your BMW 2 Series for security is a wise decision.
To begin, the adjusting of the dipped headlights of an BMW 2 Series must be done for a elementary security cause. Regardless it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an BMW 2 Series for law motives
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a BMW 2 Series?
We will now move on to the part that concerns you the more in this content page, how to adjust the low beams of his BMW 2 Series? This setting may appear a bit complicated, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a BMW 2 Series
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his BMW 2 Series
Once your car is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your BMW 2 Series (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your BMW 2 Series is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your BMW 2 Series, please browse our content page on this subject.
Whenever you have any additional questions about the BMW 2 Series, do not hesitate to consult our BMW 2 Series category.
