Regardless whether you feel you can’t see good enough through the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Although this adjustment may look simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this simple realignment, and in this article, we will see how to adjust the low beam lights of your BENTLEY CONTINENTAL ? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your BENTLEY CONTINENTAL .
Why set the low beam lights of your BENTLEY CONTINENTAL ?
So let’s commence our article with the point of adjusting the low beam lights of your BENTLEY CONTINENTAL . For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and checking this setting, either because the low beams of your BENTLEY CONTINENTAL are not illuminating well, or because you have the feeling that they are too low or too powerful is a good plan .
Adjusting the low beam of your BENTLEY CONTINENTAL for safety is a good plan.
To begin, the adjusting of the dipped headlights of an BENTLEY CONTINENTAL must be done for a basic safety cause. Whether it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an BENTLEY CONTINENTAL for law justifications
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a BENTLEY CONTINENTAL ?
We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his BENTLEY CONTINENTAL ? This setting may seem to be a bit complicated, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a BENTLEY CONTINENTAL
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his BENTLEY CONTINENTAL
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your BENTLEY CONTINENTAL (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your BENTLEY CONTINENTAL is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your BENTLEY CONTINENTAL , please browse our article on this subject.
To get more tips on the BENTLEY CONTINENTAL , take a look at the BENTLEY CONTINENTAL category.
