Regardless you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Although this adjustment may look easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this content, we will see how to adjust the low beam lights of your Audi S5? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi S5.
Why adjust the low beam lights of your Audi S5?
So let’s start our content with the benefit of adjusting the low beam lights of your Audi S5. For most people these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not automatically the case and examining this setting, either because the low beams of your Audi S5 are not lighting up well, or because you have the sense that they are too weak or too strong is a good plan .
Adjusting the low beam of your Audi S5 for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Audi S5 must be done for a ordinary safety cause. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Audi S5 for legal motives
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi S5?
We will now go forward to the section that interests you the most in this content, how to adjust the low beams of his Audi S5? This setting may seem a bit complicated, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Audi S5
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi S5
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Audi S5 (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Audi S5 is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Audi S5, please examine our content on this subject.
If you want more guides on the Audi S5, go to our Audi S5 category.
