Regardless whether you feel you can’t see good enough during the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Despite the fact this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this simple manipulation, and in this content, we will find out how to adjust the low beam lights of your Audi S3? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi S3.
Why adjust the low beam lights of your Audi S3?
So let’s start our content with the point of adjusting the low beam lights of your Audi S3. For many people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and examining this setting, either because the low beams of your Audi S3 are not illuminating well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Audi S3 for safety is a wise decision.
First of all, the adjusting of the dipped headlights of an Audi S3 must be done for a elementary safety reason. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Audi S3 for law reasons
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi S3?
We will now move on to the part that interests you the most in this content, how to adjust the low beams of his Audi S3? This setting may seem to be a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Audi S3
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi S3
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Audi S3 (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, examine that the low beam setting of your Audi S3 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Audi S3, please browse our content on this subject.
If you have any further questions about the Audi S3, do not hesitate to consult our Audi S3 category.
