Whether you feel you can’t see as well during the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Even though this correction may seem simple thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary modification, and in this content page, we will find out how to adjust the low beam lights of your Audi Rs6? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi Rs6.
Why adjust the low beam lights of your Audi Rs6?
So let’s start our content page with the benefit of adjusting the low beam lights of your Audi Rs6. For most people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and verifying this setting, either because the low beams of your Audi Rs6 are not lighting up well, or because you have the feeling that they are too low or too powerful is a good plan .
Adjusting the low beam of your Audi Rs6 for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Audi Rs6 must be done for a ordinary security reason. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Audi Rs6 for law motives
Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi Rs6?
We will now go forward to the part that concerns you the most in this content page, how to adjust the low beams of his Audi Rs6? This setting may appear to be a bit complicated, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Audi Rs6
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi Rs6
Once your motor vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Audi Rs6 (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Audi Rs6 is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Audi Rs6, please go through our content page on this subject.
To find more tips on the Audi Rs6, take a look at the Audi Rs6 category.
