Regardless whether you feel you can’t see properly during the night, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Despite the fact this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this basic modification, and in this document, we will see how to adjust the low beam lights of your Audi Q5? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi Q5.
Why set the low beam lights of your Audi Q5?
So let’s commence our document with the interest of adjusting the low beam lights of your Audi Q5. For the majority of us these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and verifying this setting, either because the low beams of your Audi Q5 are not illuminating well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Audi Q5 for security is a good plan.
To begin, the adjusting of the dipped headlights of an Audi Q5 must be done for a simple security reason. Regardless whether it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Audi Q5 for legal motives
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi Q5?
We will now go forward to the part that interests you the most in this document, how to adjust the low beams of his Audi Q5? This setting may seem a bit complex, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Audi Q5
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi Q5
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Audi Q5 (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Audi Q5 is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Audi Q5, please go through our document on this subject.
To discover more tips on the Audi Q5, take a look at the Audi Q5 category.
