Regardless you feel you can’t see good enough through the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Even though this adjustment may seem simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this ordinary manipulation, and in this content page, we will find out how to adjust the low beam lights of your Audi A7? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi A7.
Why set the low beam lights of your Audi A7?
So let’s commence our content page with the benefit of adjusting the low beam lights of your Audi A7. For many people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and checking this setting, either because the low beams of your Audi A7 are not lighting up well, or because you have the sense that they are too low or too powerful is a good idea .
Adjusting the low beam of your Audi A7 for safety is a good idea.
Firstly, the adjusting of the dipped headlights of an Audi A7 must be done for a basic safety cause. Regardless it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Audi A7 for law motives
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi A7?
We will now move on to the part that interests you the more in this content page, how to adjust the low beams of his Audi A7? This setting may seem a bit complex, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Audi A7
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi A7
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Audi A7 (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Audi A7 is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Audi A7, please read our content page on this subject.
To discover more tips on the Audi A7, take a look at the Audi A7 category.
