Whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this basic manipulation, and in this content, we will find out how to adjust the low beam lights of your Acura TSX? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Acura TSX.

set-low-beam-headlights-acura-tsx

Why set the low beam lights of your Acura TSX?

So let’s begin our content with the advantage of adjusting the low beam lights of your Acura TSX. For many people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not always the case and checking out this setting, either because the low beams of your Acura TSX are not lighting up well, or because you have the sense that they are too low or too powerful is a good option .

Adjusting the low beam of your Acura TSX for safety is a good option.

First of all, the adjusting of the dipped headlights of an Acura TSX must be done for a ordinary safety purpose. Whether it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Acura TSX for law motives

In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Acura TSX?

We will now move on to the part that interests you the most in this content, how to adjust the low beams of his Acura TSX? This setting may appear a bit complicated, but if you follow the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a Acura TSX

First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure rigorously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Acura TSX

Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Acura TSX (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, examine that the low beam setting of your Acura TSX is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Acura TSX, please go through our content on this subject.

To find more tips on the Acura TSX, take a look at the Acura TSX category.