Whether you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may seem to be easy to do thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this basic realignment, and in this content page, we will see how to adjust the low beam lights of your Acura TLX? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Acura TLX.

set-low-beam-headlights-acura-tlx

Why adjust the low beam lights of your Acura TLX?

So let’s start our content page with the benefit of adjusting the low beam lights of your Acura TLX. For many people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking this setting, either because the low beams of your Acura TLX are not lighting up well, or because you have the feeling that they are too weak or too strong is a good plan .

Adjusting the low beam of your Acura TLX for safety is a good plan.

To start, the adjusting of the dipped headlights of an Acura TLX must be done for a basic safety reason. Regardless whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore crucial for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Acura TLX for legal motives

Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Acura TLX?

We will now go forward to the part that concerns you the more in this content page, how to adjust the low beams of his Acura TLX? This setting may seem to be a bit difficult, but if you follow the guidelines you should be able to do it without too much issue.

Preparations to set the low beam of a Acura TLX

To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure carefully.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Acura TLX

Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Acura TLX (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once done, verify that the low beam setting of your Acura TLX is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Acura TLX, please go through our content page on this subject.

To discover more tips on the Acura TLX, take a look at the Acura TLX category.