Regardless whether you feel you can’t see properly at nighttime, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your motor vehicle to blame – your low beams. Even though this correction may appear simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this ordinary realignment, and in this article content, we will discover how to adjust the low beam lights of your Acura TL? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Acura TL.
Why set the low beam lights of your Acura TL?
So let’s start our article content with the point of adjusting the low beam lights of your Acura TL. For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not necessarily the case and looking at this setting, either because the low beams of your Acura TL are not illuminating well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your Acura TL for security is a wise decision.
To start, the adjusting of the dipped headlights of an Acura TL must be done for a ordinary security cause. Regardless whether it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Acura TL for legal justifications
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Acura TL?
We will now go forward to the section that concerns you the most in this article content, how to adjust the low beams of his Acura TL? This setting may appear a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Acura TL
First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Acura TL
Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Acura TL (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Acura TL is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Acura TL, please go through our article content on this subject.
If you need more tutorials on the Acura TL, go to our Acura TL category.
