Whether you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Although this adjustment may seem to be easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic modification, and in this article, we will see how to adjust the low beam lights of your Acura RDX? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Acura RDX.
Why set the low beam lights of your Acura RDX?
So let’s begin our article with the point of adjusting the low beam lights of your Acura RDX. For many of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the low beams of your Acura RDX are not illuminating well, or because you have the sense that they are too weak or too powerful is a good idea .
Adjusting the low beam of your Acura RDX for security is a good idea.
First of all, the adjusting of the dipped headlights of an Acura RDX must be done for a simple security purpose. It doesn’t matter if it’s for you, or for the other users you come across during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Acura RDX for law justifications
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Acura RDX?
We will now move on to the part that interests you the more in this article, how to adjust the low beams of his Acura RDX? This setting may seem a bit complicated, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Acura RDX
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Acura RDX
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Acura RDX (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Acura RDX is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Acura RDX, please go through our article on this subject.
To discover more tips on the Acura RDX, take a look at the Acura RDX category.
