Whether there are showers, foggy or snowing, in most cases, you appreciate being eqquiped of fog lights on your automobile. But, they can occasionally be out of adjustment or you may find that they are adjust too high or too low. That’s the reasons we had written this article to explain to you how to adjust the fog lights on your Ram P/U?. To make this happen, first, we will discover what is the purpose of adjusting the fog lights of his car, then, in an extra part, how to adjust the fog lights of your Ram P/U.
Why is it crucial to adjust the front fog lights of your Ram P/U?
So we will commence our article with the interest of setting the fog lights to Ram P/U. Nevertheless some fog lights are not set and are set at the factory, you have the opportunity to change their setting so that they light up more or less high. This equipment, which is not obligatory on an Ram P/U, allows you to greatly increase your visibility. However, it is exclusively authorized outside built-up spaces in addition to the high beam, or in heavy rain, snow or fog.
Having a perfect setting of the fog lights of its Ram P/U allows you not to blind and to maximise the gain in visibility that they offer. Moreover, fog lights that are not correctly adjusted will inevitably disturb the car owners you pass and may increase the risk of an accident. It is therefore necessary, both for you and other users, that you have your fog lights correctly adjusted.
How to adjust the fog lights of your Ram P/U?
Now let’s go forward to the part you’re almost certainly most focused on in this article, namely how to adjust the fog lights on your Ram P/U? Now that you have understood the interest of this adjustment, which may seem insignificant, let’s move on to the practical part.
Adjusting the fog lights is specifically easy, here are a few techniques to follow to do it optimally:
- Empty your car, check the pressure of your tires and, set only one person (about 70kg) in the driver’s seat which will simulate an empty weight of your Ram P/U.
- Place your car on a flat area with a clean wall in front of you, preferably between 5 and 10 meters from it.
- Measure the distance from the ground to the top of your fog lamp (on your Ram P/U), write this distance on the wall in front of your car and mark it with a construction tape for example.
- Turn on the fog lights on your Ram P/U and control that the beam of the lights is less than or equal to the mark you just marked on the wall.
- If they illuminate higher than this point, through the engine compartment you will have to use the adjustment screws to lower the lighting of your fog lights (these screws are generally found above your fog lights, you should find them quickly, they will be more or less accessible according to the year and the options of your Ram P/U)
.
Now you know how to adjust the fog lights on your Ram P/U, don’t forget to check it from time to time if you have the impression that they are not anymore illuminating properly, don’t be reluctant to read our article on how to adjust the low beam lights on Ram P/U if you want to check their lighting level.
If you want more tutorials on the Ram P/U, go to our Ram P/U category.
