Whether there are showers, foggy or snowing, in general, you appreciate having fog lights on your automobile. But, they can sometimes be out of adjustment or you may find that they are adjust too high or too low. That’s for what reason we had written this article content to demonstrate to you how to adjust the fog lights on your Chrysler Town & Country?. To achieve this, first, we will see what is the benefit of adjusting the fog lights of his car, then, in an extra part, how to adjust the fog lights of your Chrysler Town & Country.
Why is it important to adjust the front fog lights of your Chrysler Town & Country?
So we will commence our article content with the benefit of adjusting the fog lights to Chrysler Town & Country. Nevertheless some fog lights are not set and are set at the factory, you have the opportunity to modify their setting so that they illuminate more or less high. This devices, which is not obligatory on an Chrysler Town & Country, allows you to greatly boost your visibility. However, it is only permitted outside built-up spaces in addition to the high beam, or in heavy rain, snow or fog.
Having an optimal setting of the fog lights of its Chrysler Town & Country allows you not to blind and to maximise the gain in visibility that they give. In addition, fog lights that are not properly adjusted will undoubtedly bother the drivers you cross and may increase the risk of an accident. It is therefore fundamental, both for you and other users, that you have your fog lights properly adjusted.
How to adjust the fog lights of your Chrysler Town & Country?
Now let’s go forward to the portion you’re most likely most considering in this article content, namely how to adjust the fog lights on your Chrysler Town & Country? Now that you have understood the interest of this adjustment, which may seem insignificant, let’s move on to the practical part.
Adjusting the fog lights is particularly simple, here are a few things to follow to do it optimally:
- Empty your car, verify the pressure of your tires and, place only one person (about 70kg) in the driver’s seat which will simulate an empty weight of your Chrysler Town & Country.
- Place your car on a flat floor with a clean wall in front of you, ideally between 5 and 10 meters from it.
- Measure the height from the ground to the top of your fog lamp (on your Chrysler Town & Country), write this distance on the wall in front of your car and mark it with a construction tape for example.
- Turn on the fog lights on your Chrysler Town & Country and control that the beam of the lights is less than or equal to the mark you just marked on the wall.
- If they light higher than this mark, throughout the engine compartment you will have to use the adjustment screws to lower the lighting of your fog lights (these screws are generally located above your fog lights, you should find them quickly, they will be more or less accessible depending on the year and the options of your Chrysler Town & Country)
.
Now you know how to adjust the fog lights on your Chrysler Town & Country, don’t forget to check it from time to time if you have the impression that it has moved, don’t hesitate to consult our article content on how to adjust the low beam lights on Chrysler Town & Country if you want to verify their lighting level.
If perhaps you have any additional questions about the Chrysler Town & Country, do not hesitate to consult our Chrysler Town & Country category.
