In this specific article, we will try to support you get rid of all the problems you may face about your car’s rims. And, mainly, how to remove the rim of a Renault Twingo 3? Whether you want to replace a flat tire, or you want to replace your tires, you will discover all the required informations reading this article. To do so, we’ll see first how to remove the tire from a car rim, then, in a second part, how to remove a stuck rim on a Renault Twingo 3, after that, how to remove flat rim from its Renault Twingo 3 to put the spare tire, and, at last, how to unblock the stuck bolts of a rim.


How to remove the tire from the rim of a Renault Twingo 3?

So we start our document by explaining how to replace a car tire. You maybe
bought your tire on a website, however it is quite complicated to manage to find professionals, car centers which will consent to mount tires of your Renault Twingo 3purchased elsewhere than in their business. The question of wanting to mount them alone is therefore more than logical.

It is theoretically possible with a lot of force and a crowbar to replace the tires of your Renault Twingo 3 yourself, however, regardless if you manage to take off both sidewalls of the tire, to loosen it, and to put the new tire back on, you won’t be able to balance the tire if you dont have the specific tools, if you don’t do it, your tires will loose a lot of lifetime. Be aware that frequently the installation and balancing costs only about twenty euros. Whenever you wish to buy tyres on the internet to benefit of a preferential pricing, take a good look, many of retailers offer the fitting at a partner car centre absolutely free.

How to remove a rim stuck to its hub on a Renault Twingo 3?

We now move on to the part you are obviously most enthusiastic about, namely, how to remove the rim of a Renault Twingo 3 stuck to its hub, and more specifically, the rather typical circumstance of a rim that hasn’t been removed for a long time and that because of rust stuck to the hub of your wheel. Indeed, it happens to a good number of car owners to find themselves in this circumstance and not knowing how to proceed. This can be specifically annoying in the event that you have a flat tire and need to replace the rim on your Renault Twingo 3. Here are the different possibilities available to you:

  • If you have some with you, after lifting your car, and if you can on candles, and then getting rid of the rim nuts, use some anti-seize agent which you inject right into the holes of the nuts and leave it to operate for approximately ten minutes. Following that, try again to remove the rim from your Renault Twingo 3.
  • Use power : Although it is almost never the best solution, in this kind of circumstance you are facing solid pieces that do not risk much, and with the help of a mallet and a wooden wedge you can hit the side of the rim of your Renault Twingo 3 and this should unlock it and allow you to remove it.
  • Baste the junction between your rim of rust proof hub and wait some hours before attempting to unblock it once again.

How to remove the rim of a Renault Twingo 3 to replace its flat tire and replace it with the spare wheel?

We are at this time going to demonstrate you the most conventional method but that everybody doesn’t know, how to remove the rim from its place if you have a puncture tyre and you wish to replace it by the spare wheel? This operation is not complicated, here are the different steps to follow:

  • Stay out of traffic so as not to put at risk yourself.
  • Place your Renault Twingo 3 on a flat surface.
  • Put on the parking brake and engage first gear.
  • If perhaps you don’t know where the jack of your Renault Twingo 3 is, please have look at our article to learn you where is it located.
  • Before jacking up your vehicle, unlock the rim bolts so that you don’t force your transmission once lifted
  • Lift up your Renault Twingo 3 with the jack and finish unscrewing the rim nuts of your motor vehicle.
  • Remove the flat tire of your Renault Twingo 3.
  • Put on the spare wheel, put on the bolts, tighten them all by hand, in a balanced way before putting the car back on the road.
  • Complete tightening the nuts with the socket wrench

How do you remove the stuck nuts from the rim of a Renault Twingo 3?

To finish , it may happen that to remove the rim of your Renault Twingo 3 you have to deal with stuck nuts. In such a case, you will have approximately the same possibilities for the circumstance of a rim stuck against the wheel hub. The best method will be to use anti-rust lubricant or anti-rust lubricant and let it work for several minutes before unlocking the nuts. Another choice, try to look for, some exist on batteries of electric shock wrenches they generate a much higher torque than your arm plus the socket wrench, and will help you to unlock the nuts.

If you have any additional questions about the Renault Twingo 3, do not hesitate to consult our Renault Twingo 3 category.