In this post, we have planned to support you solve all the issues you might encounter around your car’s rims. And, mainly, how to remove the rim of a Lancia Ypsilon? Whether you wish to replace a flat tyre, or you wish to change your tires, you will learn all the necessary informations reading this page. To do so, we’ll see first how to remove the tire from a car rim, then, in a second part, how to remove a stuck rim on a Lancia Ypsilon, later, how to remove flat rim from its Lancia Ypsilon to put the spare tire, and, finally, how to unblock the stuck bolts of a rim.

remove-rimlancia-ypsilon

How to remove the tire from the rim of a Lancia Ypsilon?

So we begin our article by explicating how to replace a car tire. You may have made a good deal by buying your tires on the internet, however it is quite difficult to manage to find professionals, car centers that will consent to install tires of your Lancia Ypsilonbought elsewhere than in their commercial enterprise. The question of looking to install them alone is therefore more than respectable.

It is theoretically possible with a lot of strength and a crowbar to replace the tires of your Lancia Ypsilon yourself, however, even if you succed to take off both sidewalls of the tire, to loosen it, and to put the new tire back on, you won’t be able to balance the tire if you dont have the specific tools, if you don’t do it, your tires will loose a lot of lifetime. You should know that generally the installation and balancing costs only about twenty euros. In the event that you desire to buy tyres on the internet to take advantage of a preferential pricing, take a good look, a good number of dealers will offer you the fitting at a partner car centre free of charge.

How to remove a rim stuck to its hub on a Lancia Ypsilon?

We now go forward to the part you are obviously most focused on, namely, how to remove the rim of a Lancia Ypsilon stuck to its hub, and more specifically, the rather basic circumstance of a rim that hasn’t been removed for a while and that because of rust stuck to the hub of your wheel. Indeed, it happens to many car owners to find themselves in this situation and not knowing what to do. This can be extremely annoying in the case you have a flat tire and need to replace the rim on your Lancia Ypsilon. Here are the different solutions available to you:

  • In the event you have some accessible, after lifting your car, and when possible on candles, and then removing the rim nuts, use some anti-seize agent which you inject inside the holes of the nuts and let it to work for about ten minutes. Following that, try again to remove the rim from your Lancia Ypsilon.
  • Use power : Even though it is not usually the best alternative, in this kind of circumstance you are facing solid pieces that do not risk much, and with the help of a mallet and a wooden wedge you can hit the side of the rim of your Lancia Ypsilon and this should unlock it and allow you to remove it.
  • Baste the junction between your rim of rust proof hub and wait a couple of hours before attempting to unblock it again.

How to remove the rim of a Lancia Ypsilon to replace its flat tire and replace it with the spare wheel?

We are now going to demonstrate you the most classical procedure but that everybody doesn’t know, how to remove the rim from its place if you have a puncture tyre and you desire to change it by the spare wheel? This process is not complex, here are the several steps to follow:

  • Stay out of traffic so as not to put at risk yourself.
  • Place your Lancia Ypsilon on a flat surface.
  • Put on the parking brake and engage first gear.
  • If it turns out you don’t know where the jack of your Lancia Ypsilon is, don’t hesitate to consult our article to learn you where is it located.
  • Before jacking up your car, unlock the rim bolts to ensure you don’t force your transmission once lifted
  • Lift up your Lancia Ypsilon with the jack and end unscrewing the rim nuts of your car.
  • Take the flat rim off your Lancia Ypsilon.
  • Put on the spare wheel, put on the bolts, tighten them all by hand, in a balanced way before putting the car back on the road.
  • Finish tightening the nuts with the socket wrench

How do you remove the stuck nuts from the rim of a Lancia Ypsilon?

To finish , it can happen that to remove the rim of your Lancia Ypsilon you have to deal with stuck nuts. In such a case, you will have approximately the same solutions for the circumstance of a rim stuck against the wheel hub. The best method will be to use anti-rust lubricant or anti-rust lubricant and let it work for few moments before unlocking the nuts. Another choice, try to look for, some exist on batteries of electric shock wrenches they release a much higher torque than your arm plus the socket wrench, and will help you to unlock the nuts.

If perhaps you have any further questions about the Lancia Ypsilon, do not hesitate to consult our Lancia Ypsilon category.