Car mirrors are one of the most essential security features that you need to always make certain are operating properly, because it is your safety, the safety of other road users and your wallet because you can be fined if you have a defective side mirror. This is the case that interests us today, you have endured a collision, one of your mirrors is broken and you are now wanting to know how to change a side mirror on your Toyota Tundra? You are at the best place, we will explain all the guidelines to help you change it accurately. First, we’ll consider what attracts you here, how to change a complete side mirror on your Toyota Tundra, and then how to change only the mirror glass.
How to change a complete side mirror on my Toyota Tundra?
Let’s go, we begin this guide with the part that most likely interests you the most, how to change a side mirror on my Toyota Tundra? This procedure is quite easy and you should be competent to do it on your own with a minimum of tooling. You will just need to remove the plastic cover inside your car’s interior, it is in general clipped on the door. For power mirrors, make sure you unplug the power connector that you will see behind the cover. Finally, you will have to unscrew the screws that hold the mirror, usually there are three, a simple screwdriver should do the trick to let you to complete this step of changing the side mirror of your Toyota Tundra. Make sure you keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not fall out. Finally to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally put back the plastic cover. That’s it, you’ve just learned how to change the side mirror of your Toyota Tundra, you know now that it wasn’t that difficult.
How do you just change the window of the side mirror of my Toyota Tundra?
If perhaps you just need to change the window of the side mirror of your Toyota Tundra, you will initially need to discover the type of locking of your mirror. To get this done, the least complicated procedure is to have a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you need to change the side mirror glass of your Toyota Tundra and it uses a tongue and groove system, you are lucky, it is the easiest device to remove. All you have to do is to use a plastic thing to remove the window “by force”.
- To reposition it, do the same thing and push it back into place with force. To check that it is well installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Toyota Tundra you will need to identify the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Make sure you keep the spring because it is possible that you have not one included it with your new window, replace it on your new window, take apart the old one paying attention to the electric cables in the event of defrosting system
.
- Follow the positioning guide (notch) and smoothly push it into its housing so as not to break it. Verify that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the location of the swivel plate of the window to be changed on the side mirror of your Toyota Tundra, in most cases it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you less complicated access to the device and using a screwdriver, rotate the system.
- If your mirror is furnished with a defrosting system, do the reverse process to reattach it and check that it is well fixed.
To find more tips on the Toyota Tundra, take a look at the Toyota Tundra category.
