Vehicle mirrors are one of the most important security features that you need to perpetually make sure are operating properly, because it is your safety, the safety of other road users and your budget because you can be fined if you have a faulty side mirror. This is the case we will focus on today, you have endured a collision, one of your mirrors is ruined and you are now wanting to know how to change a side mirror on your Toyota C HR? You are at the best place, we will explain all the guidelines to help you replace it in the right way. To begin, we’ll look at what attracts you on this site, how to change a complete side mirror on your Toyota C HR, and then how to replace only the mirror glass.
How to replace a complete side mirror on my Toyota C HR?
Let’s go, we begin this guide with the part that most likely interests you the most, how to replace a side mirror on my Toyota C HR? This procedure is quite easy and you should be able to do it without help with a minimum amount of tooling. You will just need to take out the plastic cover inside your car’s cabin, it is generally clipped on the door. For power mirrors, make sure to unplug the power connector that you will see at the rear of the cover. To finish, you will have to unscrew the screws that hold the mirror, commonly there are three, a simple screwdriver should do just fine to allow you to pass this step of changing the side mirror of your Toyota C HR. Be sure to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not fall out. Finally to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish reposition the plastic cover. That’s it, you’ve just discovered how to replace the side mirror of your Toyota C HR, you know now that it wasn’t that difficult.
How do you just replace the window of the side mirror of my Toyota C HR?
In the event you simply need to replace the window of the side mirror of your Toyota C HR, you will initially need to discern the type of locking of your mirror. To accomplish this, the most basic approach is to have a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you need to replace the side mirror glass of your Toyota C HR and it uses a tongue and groove system, you are lucky, it is the least difficult system to take out. All you have to do is to use a plastic object to take out the window “by force”.
- To reposition it, do the same and push it back right into place with force. To check that it is perfectly positioned, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your Toyota C HR you will need to identify the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Be sure to keep the spring because it is possible that you have not one supplied it with your new window, replace it on your new window, take apart the old one paying attention to the electric cables in case of defrosting system
.
- Stick to the positioning guide (notch) and delicately push it into its housing so as not to break it. Verify that it is well positioned by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can locate the position of the swivel plate of the window to be changed on the side mirror of your Toyota C HR, generally it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you less difficult access to the device and using a screwdriver, rotate the device.
- If your mirror is built with a defrosting system, do the reverse procedure to reattach it and check that it is perfectly placed.
To find more tips on the Toyota C HR, take a look at the Toyota C HR category.
