Car mirrors are one of the vital safety features that you need to perpetually ensure that are working properly, because it is your safety, the safety of other drivers and your budget because you can be fined if you have a defective side mirror. This is the circumstance we will focus on in this article, you have suffered a crash, one of your side mirrors is ruined and you are now wanting to know how to change a side mirror on your Toyota C-hr? You are at the right place, we will highlight all the guidelines to help you replace it properly. First, we’ll have a look at what attracts you on this site, how to change a complete side mirror on your Toyota C-hr, and then how to replace only the mirror glass.
How to replace a complete side mirror on my Toyota C-hr?
Let’s go, we begin this guide with the part that probably interests you the most, how to replace a side mirror on my Toyota C-hr? This process is fairly simple and you should be capable to do it without help with a minimum amount of tooling. You will just need to remove the plastic cover inside your car’s cabin, it is in most cases clipped on the door. For power mirrors, make sure you unplug the power connector that you will see at the rear of the cover. At last, you will have to unscrew the screws that hold the mirror, generally there are three, a simple screwdriver should do the trick to allow you to pass this step of changing the side mirror of your Toyota C-hr. Make sure you keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not fall out. At last to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish put back the plastic cover. That’s it, you’ve just learned how to replace the side mirror of your Toyota C-hr, you see it wasn’t that hard to do.
How do you just replace the window of the side mirror of my Toyota C-hr?
In the event you only wish to replace the window of the side mirror of your Toyota C-hr, you will first need to determine the sort of locking of your mirror. To get this done, the quickest technique is to have a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you wish to replace the side mirror glass of your Toyota C-hr and it uses a tongue and groove system, you are fortunate people, it is the easiest device to remove. All you have to do is to use a plastic thing to remove the window “by force”.
- To put it back in place, do the same and push it back into place with force. To verify that it is perfectly placed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your Toyota C-hr you will need to identify the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Make sure you keep the spring because it is possible that you have not one provided it with your new window, replace it on your new window, dismantle the old one paying attention to the electric cables in case there is defrosting system
.
- Stick to the positioning guide (notch) and delicately push it into its housing so as not to break it. Verify that it is well placed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can find the position of the swivel plate of the window to be changed on the side mirror of your Toyota C-hr, in most cases it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you easier access to the device and using a screwdriver, rotate the device.
- If your mirror is furnished with a defrosting system, do the reverse procedure to reattach it and check that it is perfectly fixed.
If you wish more guides on the Toyota C-hr, go to our Toyota C-hr category.
