Vehicle mirrors are one of the vital safety features that you must perpetually ensure that are operating properly, because it is your safety, the safety of other road users and your wallet because you can be fined if you have a defective side mirror. This is the case that interests us on this page, you have suffered a collision, one of your mirrors is ruined and you are now wanting to know how to change a side mirror on your Peugeot Partner? You are at the right spot, we will highlight all the steps to help you replace it in the right way. First of all, we’ll have a look at what attracts you on this website, how to change a complete side mirror on your Peugeot Partner, and then how to replace only the mirror glass.

change-side-mirror-peugeot-partner

How to replace a complete side mirror on my Peugeot Partner?

Let’s go, we start this guidebook with the part that almost certainly concerns you the most, how to replace a side mirror on my Peugeot Partner? This process is fairly simple and you should be capable to do it without help with a minimum of tooling. You will just need to take out the plastic cover inside your car’s cabin, it is in general clipped on the door. For power mirrors, make sure to unplug the power connector that you will see behind the cover. At last, you will have to unscrew the screws that hold the mirror, generally there are three, a simple screwdriver should do the trick to allow you to pass this step of changing the side mirror of your Peugeot Partner. Make sure to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not fall out. At last to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally put back the plastic cover. That’s it, you’ve just discovered how to replace the side mirror of your Peugeot Partner, you know now that it wasn’t that difficult.

How do you just replace the window of the side mirror of my Peugeot Partner?

In the event that you only want to replace the window of the side mirror of your Peugeot Partner, you will first of all need to discern the type of locking of your mirror. To accomplish this, the most basic approach is to take a look at the fixing system on the replacement glass.

Side mirror glass replacing: tongue-locking glass

  • If you want to replace the side mirror glass of your Peugeot Partner and it uses a tongue and groove system, you are lucky, it is the least complicated system to take out. All you have to do is to use a plastic thing to take out the window “by force”.
  • To put it back in place, do the same thing and push it back right into place with force. To check that it is perfectly positioned, move it around.

Side mirror glass replacing: metal spring locking glass

    • With this locking system, to replace the side mirror glass of your Peugeot Partner you will have to locate the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
    • Make sure to keep the spring because it is possible that you have not one supplied it with your new window, replace it on your new window, take apart the old one paying attention to the electric cables in case of defrosting system

.

  • Stick to the positioning guide (notch) and gently push it into its housing so as not to break it. Verify that it is well positioned by moving it around.

Side mirror glass replacing: swivel tray locking glass

    • You can uncover the position of the swivel plate of the window to be changed on the side mirror of your Peugeot Partner, generally it is at the bottom behind the window

.

  • Turn the glass in the opposite direction to give you less difficult access to the device and using a screwdriver, rotate the device.
  • If your mirror is built with a defrosting system, do the reverse procedure to reattach it and check that it is perfectly fixed.

Whenever you have any additional questions about the Peugeot Partner, do not hesitate to consult our Peugeot Partner category.