Car mirrors are one of the most crucial safety features that you need to perpetually make certain are operating correctly, because it is your safety, the safety of other motorists and your finances because you can be fined if you have a defective side mirror. This is the case we will focus on on this page, you have endured a collision, one of your side mirrors is broken and you are now wondering how to change a side mirror on your Peugeot Bipper? You are at the best place, we will highlight all the steps to help you change it in the right way. To begin, we’ll examine what attracts you on this page, how to change a complete side mirror on your Peugeot Bipper, and then how to change only the mirror glass.
How to change a complete side mirror on my Peugeot Bipper?
Let’s go, we start this guidebook with the part that almost certainly interests you the most, how to change a side mirror on my Peugeot Bipper? This operation is quite easy and you should be able to do it without help with a minimum amount of tooling. You will just need to remove the plastic cover inside your car’s cabin, it is generally clipped on the door. For power mirrors, be sure to unplug the power connector that you will see at the rear of the cover. At last, you will have to unscrew the screws that hold the mirror, generally there are three, a simple screwdriver should do just fine to let you to complete this step of changing the side mirror of your Peugeot Bipper. Make sure you keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not drop out. Finally to install your new side mirror, you will only have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally reposition the plastic cover. That’s it, you’ve just discovered how to change the side mirror of your Peugeot Bipper, you see it wasn’t that complicated.
How do you just change the window of the side mirror of my Peugeot Bipper?
In the event that you just want to change the window of the side mirror of your Peugeot Bipper, you will first of all need to determine the type of locking of your mirror. To achieve this, the most basic strategy is to examine the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to change the side mirror glass of your Peugeot Bipper and it uses a tongue and groove system, you are fortunate people, it is the easiest system to remove. All you have to do is to use a plastic thing to remove the window “by force”.
- To reposition it, do the same and push it back in place with force. To verify that it is perfectly positioned, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Peugeot Bipper you will need to locate the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Make sure you keep the spring because it is possible that you have not one supplied it with your new window, change it on your new window, take apart the old one paying attention to the electric cables in case of defrosting system
.
- Follow the positioning guide (notch) and delicately push it into its housing so as not to break it. Examine that it is well positioned by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the position of the swivel plate of the window to be changed on the side mirror of your Peugeot Bipper, most of the time it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you less difficult access to the device and using a screwdriver, rotate the mechanism.
- If your mirror is equipped with a defrosting system, do the reverse operation to reattach it and check that it is perfectly fixed.
If you wish more guides on the Peugeot Bipper, go to our Peugeot Bipper category.
