Vehicle mirrors are one of the most important security features that you need to perpetually be sure are operating properly, because it is your safety, the safety of other drivers and your finances because you can be fined if you have a malfunctioning mirror. This is the case that interests us in this article, you have experienced a crash, one of your mirrors is broken and you are now wanting to know how to change a side mirror on your Nissan Pulsar? You are at the right place, we will describe all the guidelines to help you replace it in the correct way. First, we’ll take a look at what attracts you on this site, how to change a complete side mirror on your Nissan Pulsar, and then how to replace only the mirror glass.
How to replace a complete side mirror on my Nissan Pulsar?
Let’s go, we start this guidebook with the part that almost certainly concerns you the most, how to replace a side mirror on my Nissan Pulsar? This operation is quite simple and you should be competent to do it without help with a minimum amount of tooling. You will just need to remove the plastic cover inside your car’s cabin, it is usually clipped on the door. For power mirrors, make sure to unplug the power connector that you will see behind the cover. Finally, you will have to unscrew the screws that hold the mirror, usually there are three, a simple screwdriver should do just fine to enable you to complete this step of changing the side mirror of your Nissan Pulsar. Make sure to keep the mirror on the outside of your car when unscrewing the last screw, so that it does not drop out. At last to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally reposition the plastic cover. That’s it, you’ve just learned how to replace the side mirror of your Nissan Pulsar, you know now that it wasn’t that complicated.
How do you just replace the window of the side mirror of my Nissan Pulsar?
In the event that you simply want to replace the window of the side mirror of your Nissan Pulsar, you will first need to identify the sort of locking of your mirror. To achieve this, the easiest technique is to take a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to replace the side mirror glass of your Nissan Pulsar and it uses a tongue and groove system, you are fortunate people, it is the easiest system to remove. All you have to do is to use a plastic thing to remove the window “by force”.
- To reposition it, do the same thing and push it back into place with force. To check that it is well installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your Nissan Pulsar you will need to identify the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Make sure to keep the spring because it is possible that you have not one supplied it with your new window, replace it on your new window, take apart the old one paying attention to the electric cables in case there is defrosting system
.
- Follow the positioning guide (notch) and gently push it into its housing so as not to break it. Verify that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the position of the swivel plate of the window to be changed on the side mirror of your Nissan Pulsar, most of the time it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you easier access to the device and using a screwdriver, rotate the device.
- If your mirror is furnished with a defrosting system, do the reverse procedure to reattach it and check that it is well fixed.
If you wish more guides on the Nissan Pulsar, go to our Nissan Pulsar category.
