Car mirrors are one of the vital safety features that you need to always make certain are functioning properly, because it is your safety, the safety of other drivers and your wallet because you can be fined if you have a faulty mirror. This is the circumstance that interests us today, you have dealt with a crash, one of your mirrors is broken and you are now wanting to know how to change a side mirror on your Mazda 5? You are at the best place, we will highlight all the steps to help you replace it correctly. First of all, we’ll examine what attracts you in this article, how to change a complete side mirror on your Mazda 5, and then how to replace only the mirror glass.

change-side-mirror-mazda-5

How to replace a complete side mirror on my Mazda 5?

Let’s go, we commence this article with the part that most likely interests you the most, how to replace a side mirror on my Mazda 5? This procedure is quite simple and you should be capable to do it on your own with a minimum amount of tooling. You will just need to take off the plastic cover inside your car’s interior, it is usually clipped on the door. For power mirrors, remember to unplug the power connector that you will see at the rear of the cover. To finish, you will have to unscrew the screws that hold the mirror, generally there are three, a simple screwdriver should do the trick to enable you to complete this step of changing the side mirror of your Mazda 5. Make sure keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not drop out. At last to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally reposition the plastic cover. That’s it, you’ve just discovered how to replace the side mirror of your Mazda 5, you know now that it wasn’t that hard to do.

How do you just replace the window of the side mirror of my Mazda 5?

In the event you only wish to replace the window of the side mirror of your Mazda 5, you will initially need to determine the kind of locking of your mirror. To get this done, the least complicated procedure is to look at the fixing system on the replacement glass.

Side mirror glass replacing: tongue-locking glass

  • If you wish to replace the side mirror glass of your Mazda 5 and it uses a tongue and groove system, you are lucky, it is the easiest system to take off. All you have to do is to use a plastic object to take off the window “by force”.
  • To put it back in place, do the same thing and push it back in place with force. To verify that it is perfectly installed, move it around.

Side mirror glass replacing: metal spring locking glass

    • With this locking system, to replace the side mirror glass of your Mazda 5 you will need to find the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
    • Make sure keep the spring because it is possible that you have not one supplied it with your new window, replace it on your new window, dismantle the old one paying attention to the electric cables in case of defrosting system

.

  • Go along with the positioning guide (notch) and softly push it into its housing so as not to break it. Check that it is well installed by moving it around.

Side mirror glass replacing: swivel tray locking glass

    • You can find the position of the swivel plate of the window to be changed on the side mirror of your Mazda 5, in most cases it is at the bottom behind the window

.

  • Turn the glass in the opposite way to give you much easier access to the device and using a screwdriver, rotate the system.
  • If your mirror is built with a defrosting system, do the reverse procedure to reattach it and check that it is perfectly placed.

If you have any additional questions about the Mazda 5, do not hesitate to consult our Mazda 5 category.