Car mirrors are one of the vital safety features that you need to constantly ensure are operating correctly, because it is your safety, the safety of other road users and your finances because you can be fined if you have a malfunctioning side mirror. This is the case that interests us on this page, you have experienced a collision, one of your mirrors is damaged and you are now wondering how to change a side mirror on your Infiniti QX70? You are at the right spot, we will detail all the procedures to help you replace it in the right way. To begin, we’ll take a look at what attracts you here, how to change a complete side mirror on your Infiniti QX70, and then how to replace only the mirror glass.
How to replace a complete side mirror on my Infiniti QX70?
Let’s go, we begin this article with the part that most probably interests you the most, how to replace a side mirror on my Infiniti QX70? This procedure is very simple and you should be able to do it on your own with a minimum of tooling. You will just need to take off the plastic cover inside your car’s cabin, it is in most cases clipped on the door. For power mirrors, remember to unplug the power connector that you will see at the rear of the cover. To finish, you will have to unscrew the screws that hold the mirror, generally there are three, a simple screwdriver should do the trick to allow you to pass this step of changing the side mirror of your Infiniti QX70. Make sure keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not fall out. Finally to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish put back the plastic cover. That’s it, you’ve just learned how to replace the side mirror of your Infiniti QX70, you see it wasn’t that difficult.
How do you just replace the window of the side mirror of my Infiniti QX70?
In the event you simply wish to replace the window of the side mirror of your Infiniti QX70, you will initially need to discern the type of locking of your mirror. To do this, the least complicated procedure is to take a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you wish to replace the side mirror glass of your Infiniti QX70 and it uses a tongue and groove system, you are fortunate people, it is the least difficult device to take off. All you have to do is to use a plastic object to take off the window “by force”.
- To put it back in place, do the same thing and push it back into place with force. To check that it is perfectly installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your Infiniti QX70 you will have to find the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Make sure keep the spring because it is possible that you have not one supplied it with your new window, change it on your new window, take apart the old one paying attention to the electric cables in case of defrosting system
.
- Follow the positioning guide (notch) and softly push it into its housing so as not to break it. Check that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can find the position of the swivel plate of the window to be changed on the side mirror of your Infiniti QX70, in most cases it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you less complicated access to the device and using a screwdriver, rotate the mechanism.
- If your mirror is equipped with a defrosting system, do the reverse operation to reattach it and check that it is perfectly placed.
If perhaps you have any additional questions about the Infiniti QX70, do not hesitate to consult our Infiniti QX70 category.
