Vehicle mirrors are one of the most important safety features that you must constantly ensure that are operating correctly, because it is your safety, the safety of other drivers and your budget because you can be fined if you have a malfunctioning mirror. This is the circumstance that interests us in this article, you have endured a collision, one of your side mirrors is ruined and you are now wanting to know how to change a side mirror on your Infiniti QX30? You are at the right place, we will highlight all the steps to help you change it properly. To begin, we’ll take a look at what attracts you in this article, how to change a complete side mirror on your Infiniti QX30, and then how to change only the mirror glass.
How to change a complete side mirror on my Infiniti QX30?
Let’s go, we begin this article with the part that certainly interests you the most, how to change a side mirror on my Infiniti QX30? This operation is quite easy and you should be competent to do it without help with a minimum amount of tooling. You will just need to take off the plastic cover inside your car’s cabin, it is usually clipped on the door. For power mirrors, make sure to unplug the power connector that you will see in back of the cover. Finally, you will have to unscrew the screws that hold the mirror, in general there are three, a simple screwdriver should do the trick to let you to pass this step of changing the side mirror of your Infiniti QX30. Make sure to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not drop out. Finally to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish put back the plastic cover. That’s it, you’ve just learned how to change the side mirror of your Infiniti QX30, you know now that it wasn’t that complicated.
How do you just change the window of the side mirror of my Infiniti QX30?
In the event that you only wish to change the window of the side mirror of your Infiniti QX30, you will first of all need to discover the type of locking of your mirror. To achieve this, the least complicated methodology is to examine the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you wish to change the side mirror glass of your Infiniti QX30 and it uses a tongue and groove system, you are fortunate people, it is the most simple device to take off. All you have to do is to use a plastic object to take off the window “by force”.
- To put it back in place, do the same and push it back in place with force. To check that it is well placed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Infiniti QX30 you will have to locate the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Make sure to keep the spring because it is possible that you have not one supplied it with your new window, change it on your new window, take apart the old one paying attention to the electric cables in case of defrosting system
.
- Follow the positioning guide (notch) and smoothly push it into its housing so as not to break it. Examine that it is well placed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the position of the swivel plate of the window to be changed on the side mirror of your Infiniti QX30, in most cases it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you much easier access to the device and using a screwdriver, rotate the device.
- If your mirror is built with a defrosting system, do the reverse operation to reattach it and check that it is well placed.
If you have any further questions about the Infiniti QX30, do not hesitate to consult our Infiniti QX30 category.
