Car mirrors are one of the vital security features that you have to perpetually make sure are operating properly, because it is your safety, the safety of other motorists and your wallet because you can be fined if you have a defective mirror. This is the circumstance that interests us in this article, you have suffered a crash, one of your mirrors is broken and you are now wanting to know how to change a side mirror on your GMC Yukon? You are at the right place, we will highlight all the steps to help you replace it in the correct way. First of all, we’ll examine what attracts you here, how to change a complete side mirror on your GMC Yukon, and then how to replace only the mirror glass.
How to replace a complete side mirror on my GMC Yukon?
Let’s go, we commence this guide with the part that probably appeal you the most, how to replace a side mirror on my GMC Yukon? This operation is quite easy and you should be competent to do it without help with a minimum amount of tooling. You will just need to remove the plastic cover inside your car’s interior, it is generally clipped on the door. For power mirrors, remember to unplug the power connector that you will see at the rear of the cover. Finally, you will have to unscrew the screws that hold the mirror, usually there are three, a simple screwdriver should do the trick to let you to pass this step of changing the side mirror of your GMC Yukon. Be sure to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not drop out. Finally to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish put back the plastic cover. That’s it, you’ve just discovered how to replace the side mirror of your GMC Yukon, you know now that it wasn’t that complicated.
How do you just replace the window of the side mirror of my GMC Yukon?
In case you simply want to replace the window of the side mirror of your GMC Yukon, you will first need to identify the sort of locking of your mirror. To get this done, the least complicated approach is to examine the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to replace the side mirror glass of your GMC Yukon and it uses a tongue and groove system, you are fortunate people, it is the most simple device to remove. All you have to do is to use a plastic thing to remove the window “by force”.
- To reposition it, do the same and push it back into place with force. To check that it is perfectly installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your GMC Yukon you will need to identify the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Be sure to keep the spring because it is possible that you have not one included it with your new window, replace it on your new window, take apart the old one paying attention to the electric cables in case of defrosting system
.
- Go along with the positioning guide (notch) and smoothly push it into its housing so as not to break it. Verify that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the position of the swivel plate of the window to be changed on the side mirror of your GMC Yukon, most of the time it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you less complicated access to the device and using a screwdriver, rotate the mechanism.
- If your mirror is furnished with a defrosting system, do the reverse process to reattach it and check that it is perfectly placed.
In the event that you have any further questions about the GMC Yukon, do not hesitate to consult our GMC Yukon category.
