Vehicle mirrors are one of the most crucial security features that you must constantly make certain are functioning properly, because it is your safety, the safety of other road users and your budget because you can be fined if you have a malfunctioning mirror. This is the case that interests us today, you have experienced a collision, one of your mirrors is ruined and you are now wanting to know how to change a side mirror on your Ford Fusion? You are at the best place, we will highlight all the steps to help you change it accurately. To begin, we’ll have a look at what attracts you in this article, how to change a complete side mirror on your Ford Fusion, and then how to change only the mirror glass.
How to change a complete side mirror on my Ford Fusion?
Let’s go, we commence this article with the part that probably appeal you the most, how to change a side mirror on my Ford Fusion? This process is very simple and you should be capable to do it without help with a minimum amount of tooling. You will just need to remove the plastic cover inside your car’s interior, it is generally clipped on the door. For power mirrors, make sure you unplug the power connector that you will see at the rear of the cover. Finally, you will have to unscrew the screws that hold the mirror, generally there are three, a simple screwdriver should do the trick to enable you to complete this step of changing the side mirror of your Ford Fusion. Remember to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not drop out. At last to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally put back the plastic cover. That’s it, you’ve just learned how to change the side mirror of your Ford Fusion, you know now that it wasn’t that hard to do.
How do you just change the window of the side mirror of my Ford Fusion?
In case you just need to change the window of the side mirror of your Ford Fusion, you will initially need to identify the sort of locking of your mirror. To do this, the most basic strategy is to check out the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you need to change the side mirror glass of your Ford Fusion and it uses a tongue and groove system, you are lucky, it is the most simple system to remove. All you have to do is to use a plastic object to remove the window “by force”.
- To put it back in place, do the same and push it back in place with force. To check that it is perfectly installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Ford Fusion you will need to find the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Remember to keep the spring because it is possible that you have not one supplied it with your new window, replace it on your new window, dismantle the old one paying attention to the electric cables in the event of defrosting system
.
- Go along with the positioning guide (notch) and carefully push it into its housing so as not to break it. Verify that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the location of the swivel plate of the window to be changed on the side mirror of your Ford Fusion, generally it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you much easier access to the device and using a screwdriver, rotate the device.
- If your mirror is furnished with a defrosting system, do the reverse operation to reattach it and check that it is perfectly fixed.
To find more tips on the Ford Fusion, take a look at the Ford Fusion category.
