Vehicle mirrors are one of the most crucial safety features that you must constantly ensure are functioning properly, because it is your safety, the safety of other road users and your finances because you can be fined if you have a defective mirror. This is the case that interests us in this article, you have dealt with a collision, one of your mirrors is ruined and you are now wanting to know how to change a side mirror on your Fiat Idea? You are at the right place, we will detail all the steps to help you replace it correctly. To begin, we’ll consider what attracts you on this page, how to change a complete side mirror on your Fiat Idea, and then how to replace only the mirror glass.
How to replace a complete side mirror on my Fiat Idea?
Let’s go, we start this guide with the part that likely concerns you the most, how to replace a side mirror on my Fiat Idea? This process is very simple and you should be capable to do it without help with a minimum of tooling. You will just need to take out the plastic cover inside your car’s cabin, it is generally clipped on the door. For power mirrors, be sure to unplug the power connector that you will see in back of the cover. At last, you will have to unscrew the screws that hold the mirror, in general there are three, a simple screwdriver should do just fine to allow you to complete this step of changing the side mirror of your Fiat Idea. Make sure to keep the mirror on the outside of your car when unscrewing the last screw, so that it does not drop out. Finally to install your new side mirror, you will only have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally put back the plastic cover. That’s it, you’ve just discovered how to replace the side mirror of your Fiat Idea, you know now that it wasn’t that hard to do.
How do you just replace the window of the side mirror of my Fiat Idea?
In the event you just wish to replace the window of the side mirror of your Fiat Idea, you will first of all need to discover the type of locking of your mirror. To achieve this, the quickest technique is to look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you wish to replace the side mirror glass of your Fiat Idea and it uses a tongue and groove system, you are fortunate people, it is the least difficult unit to take out. All you have to do is to use a plastic thing to take out the window “by force”.
- To put it back in place, do the same and push it back in place with force. To verify that it is perfectly situated, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your Fiat Idea you will have to locate the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Make sure to keep the spring because it is possible that you have not one supplied it with your new window, replace it on your new window, dismantle the old one paying attention to the electric cables in case of defrosting system
.
- Follow the positioning guide (notch) and carefully push it into its housing so as not to break it. Examine that it is well situated by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can locate the location of the swivel plate of the window to be changed on the side mirror of your Fiat Idea, most of the time it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you much easier access to the device and using a screwdriver, rotate the device.
- If your mirror is equipped with a defrosting system, do the reverse procedure to reattach it and check that it is perfectly placed.
In the event that you have any further questions about the Fiat Idea, do not hesitate to consult our Fiat Idea category.
